240v Timed Mini Motion Detectors - activated by body movement

Recessed round ‘eye’ type, up to 2.5m detection range, 250w switching capacity, adjustable time 10 seconds to 3 minutes. Silver finish sensor, 240v input & output leads required

Note: For switching low voltage or LED, place on 240v input side of transformer / driver

240v Infra Red Switches - activated by nearby hand movement

Recessed round - flush mounting ‘eye’ sensor on / off switch, effective detection range: up to 50mm, 250w switching capacity, lead to sensor 1970mm, sensor dia 17mm, body dia 13mm, depth 12mm

Black sensor, 240v input & output leads required. Not: For switching low voltage or LED, place on 240v input side of transformer / driver

Door Switch Surface mounting, 23 x 18 x 8mm, silver finish – JB plug to switch unit: 300mm, switch unit to sensor: 2.0m, switch unit to 6way JB socket: 360mm, max. switching capacity 12v: 24w, 24v: 48w. Open the door, the lamps turn on. Close the door, the lamps turn off.

Single head for single door units Twin head for double door units Note: Sensors may be rebated or mounted behind front boar with clearance hole drilled through to PIR. Max distance from door: 50mm. Either widen diameter of clearance hole or mount nearer to door until correct results are achieved.

Push-to-Break Contact Door Switches

Mortice Mounting - for sliding or hinged doors 12v to 240v 2A

Surface Mounting- for sliding or hinged doors 12v to 240v 6A, 35mm wide, 41mm front to back, 19.5mm high