Dimmable LED Drivers – for connecting to 240v dimmer switches
Note: The LED load must be greater than the minimum load of the dimmer it is being paired with –
details usually shown on the back of the dimmer

  A series of dip switches gives the user the option to flick the output to any of the following voltages
& maximum loads:

350mA (17W),
500mA (24W),
550mA (25W),
700mA (32W),
750mA (32W), 12V
(10W), 24V (20W),
and 28V (22W).

This driver has no minimum load.
350, 500, 550, 700 & 750mA,
12, 24 and 28V
 
  12v 10w constant voltage
LED driver
 
   
 
12v 20w constant voltage
LED driver
  12v 30w constant voltage
LED driver

12v 45w constant voltage
LED driver
  12v 50w constant voltage
LED driver with dimmer module
   
 
12v 80w constant voltage
LED driver
  24v 20w constant voltage
LED driver
  24v 30w constant voltage
LED driver

24v 45w constant voltage
LED driver
  (Left)
24v 80w constant voltage
LED driver
 
Remote Controls
12 or 24v RF Remote Dimmer Control for LED - for constant voltage LED driver, 3 button remote.
  Push fit hard wire connections. Receiver may be concealed behind plinth or cornice. Restores brightness to last memory function.

Remotes can’t be synchronised

6way socket, maximum loads: 12v up to 96w, 24v up to 192w
 
  12 or 24v RF Remote Dimmer Control for LED - for constant voltage LED driver, 5 button remote plus 15 position touch.

Remotes may be synchronised

6way socket, maximum loads: 12v up to 144w, 24v up to 288w

LED - will control up to 288w
 
  Speak to one of our sales team today on 01728 603626
© Clandvik 2016