IP65 Side Emitting Self Adhesive LED Tape 5.0mm wide x 2.5 mm thick, 12v, 60LED & 4.8w per metre, max. 6m roll, separable every 50mm 12v 3000K warm white 12v 6000K cool white 2m pre-soldered input lead, IP rated

Uses: curved plinths, aluminium handle toughs (will go round an island in one piece), out-of-sight granite worktop underlighting – will fit in saw groove in underside of granite worktop

IP65 Self Adhesive 60LED Tape with 2m pre-soldered input lead 8mm wide, 60 LED, 4.8w per metre, max. 6m roll, separable every 50mm 12v 3000K warm white 12v 4000K neutral white 12v 6000K cool white 12v Blue 12v Green 12v Red

Uses: Under unit plinth lighting, vertical in-unit lighting where framed glass fronted doors are used

IP65 Ultra High Output Self Adhesive 60 LED Tape with 2m pre-soldered input lead 10mm wide, 24v, 60LED 14.4w per metre, max. 10m roll, separable every 100mm 24v warm white 24v cool white

Uses: All the above, where even more light is required

Extender Lead 1.5m JB male to female extender lead, JB plug & socket, for 12 & 24v circuits 1.0m TOP male to female extender lead, TOP plug & socket, for 12 & 24v circuits 2.0m TOP male to female extender lead, TOP plug & socket, for 12 & 24v circuits

12v LED Drivers - DC driver with auto reset, integrated electronic short circuit & overload protection 12v 6w driver, 4way JB socket, 1.5m feed-in lead 12v 15w driver, 6 way JB socket,1.5m feed-in lead 12v 30w driver, 6 way JB socket,1.5m feed-in lead 12v 50w driver, 6 way JB socket,1.5m feed-in lead 12v 60w driver, 6 way JB socket,1.5m feed-in lead 12way JB socket with output lead

24v LED Drivers - DC driver with auto reset, integrated electronic short circuit & overload protection

24v 6 watt, 4 way JB socket, 1.5m feed-in lead 24v 15 watt, 6 way JB socket, 1.5m feed-in lead 24v 30 watt, 6 way JB socket, 1.5m feed-in lead 24v 50w driver, 6 way JB socket, 1.5m feed-in lead 12way JB socket with output lead

IP65 240v LED Tape 14mm wide, 8mm high, 240v, 60LED 11w per metre, max. 50m roll, separable every metre. 24v warm white 24v cool white

Must be used with rectified input power lead, compatible with most UK dimmers. NO LED DRIVERS NECESSARY – connect straight to mains